Low Pressure Metric Nozzle Nut

Low Pressure Metric Nozzle Nut

The low pressure metric steel nozzle nut is used in low pressure piping systems and connections in fluid engineering.

It connects to a metric diameter steel nozzle or tube and prevents leaks. Made of high quality steel with metric thread to fit the corresponding tube.

Ideal for applications with low fluid pressure.

Tipo de Medida
Métrica
Género del conector
NUT
Material
Acero

You might also like

Img Ref. Covasa
Rosca
Low Pressure Metric Nozzle Nut
0206-10 M 10x1
Low Pressure Metric Nozzle Nut
0206-12 M 12x1,5
Low Pressure Metric Nozzle Nut
0206-14 M 14x1,5
Low Pressure Metric Nozzle Nut
0206-16 M 16x1,5
Low Pressure Metric Nozzle Nut
0206-18 M 18x1,5
Low Pressure Metric Nozzle Nut
0206-22 M 22x1,5
Low Pressure Metric Nozzle Nut
0206-26 M 26x1,5
Total 0,0

The low-pressure metric steel nozzle nut is a component used in low-pressure piping systems and connections in fluid engineering applications.

It is designed to connect to a metric diameter steel nozzle or tube and is used to secure the connection and prevent leaks in the system.

The nut is made of high-quality steel and has a metric thread that fits the corresponding nozzle or tube.

Its low-pressure design allows it to be used in applications where the fluid pressure is not very high.

20 other products in the same category:

Inch Low Pressure Nozzle
To Press In Hose

Inch Low Pressure Nozzle

0103a
A low-pressure steel nozzle in inches allows the conveyance of liquids and fluids in pipelines. It is corrosion-resistant, has a conical shape, and is connected to the pipeline through an aluminum bell, cap, or clamp. It is common in low-pressure hydraulic circuits.
View
Male Inch Low Pressure
To Press In Hose

Male Inch Low Pressure

0102a
The Low Pressure Steel Inch Male is a durable and corrosion-resistant pipe accessory designed for low pressure applications. Its design allows for easy installation and maintenance, making it a popular choice in the fluid engineering industry.
View
Low Pressure Metric Male
To Press In Hose

Low Pressure Metric Male

0202
The Metric Low Pressure Male allows the connection of low pressure pipes through metric male or gas thread as needed. This terminal is widely used in the conduction of hydraulic fluid at low pressure.
View
90º Elbow Thread Inch Low...
To Press In Hose

90º Elbow Thread Inch Low Pressure

0104
The 90º Threaded Inch Low Pressure Steel Elbow allows for the flow of fluids at a 90-degree angle in low-pressure systems. It is made of high-quality steel and has inch threads for easy installation. It is not suitable for high-pressure systems or corrosive fluids.
View
Double Low Pressure...
To Press In Hose

Double Low Pressure Spherical Terminal

01014
The Double Low Pressure Steel Spherical Terminal is a pipe accessory that allows the connection of two pipes with an intermediate connection. It is made of high quality carbon steel to resist corrosion and pressure. Its spherical design allows greater flexibility in the direction of flow and reduces flow resistance, resulting in a reduction in pressure...
View
FE Bell
To Press In Hose

FE Bell

0106
The Steel FE Bell allows the attachment of connection fittings to pipes.It is made of galvanized steel and is used for low pressure pipes. Easy installation and available in different sizes.It meets safety standards for efficiency.
View
Low Pressure Spherical...
To Press In Hose

Low Pressure Spherical Terminal

0101
The Low-Pressure Steel Spherical Terminal is a strong and spherical pipe accessory that allows for thermal expansion and contraction without excessive stress. Ideal for applications that require great flexibility and resistance to corrosion and abrasion.
View
Double Low Pressure Terminal
To Press In Hose

Double Low Pressure Terminal

02014
The Low Pressure Double Steel Terminal is a durable and resistant steel accessory that connects two low-pressure pipes in pipeline systems. Its flared ends are adjusted by welding or threading, and its central connection allows for connection with other elements of the system. It is commonly used in the fluid industry to transport liquids and gases at low...
View
SAE Rubber Low Pressure...
To Press In Hose

SAE Rubber Low Pressure Straight Connection

0104a
The low-pressure rubber SAE straight connection is used in hydraulic and pneumatic systems. It consists of a steel nut, a retaining ring, and a rubber gasket for sealing. It is easy to install and disassemble for maintenance and repair. Make sure to tighten the nut properly to prevent fluid leaks.
View
Low Pressure Inch Nozzle Nut
To Press In Hose

Low Pressure Inch Nozzle Nut

02061
The Low Pressure Steel Nozzle Nut is a strong and durable component for pipeline systems. It allows for easy coupling and uncoupling of nozzles, facilitating maintenance and repair of the system. Ideal for use in irrigation systems or in the hydraulic industry.
View
Low Pressure Nozzle
To Press In Hose

Low Pressure Nozzle

0203
A low-pressure steel nozzle is a terminal for fluid-conducting pipes at low pressure. Variety of sizes to facilitate its use according to need.
View
STRAIGHT CONNECTOR
To Press In Hose

STRAIGHT CONNECTOR

02050
A straight low-pressure steel coupling connects two rubber tubes of equal diameter in a low-pressure line. It consists of two grooved spigots that ensure a tight connection. They are common in fuel, hydraulic and fluid transport applications, and in low-pressure liquid and gas transport systems. They withstand relatively low pressures and are suitable for...
View
Low Pressure Metric Nozzle
To Press In Hose

Low Pressure Metric Nozzle

0103b
A low-pressure metric steel nozzle allows the conveyance of liquids and fluids in pipelines. It is corrosion-resistant, has a conical shape, and is connected to the pipe by means of an aluminum bell, cap, or clamp. It is common in low-pressure hydraulic circuits.
View
Low Pressure Splice T
To Press In Hose

Low Pressure Splice T

02057
The Low Pressure Steel Tee Connector is an accessory that connects three sections of low pressure piping of the same diameter. It is easy to install and dismantle without special tools. It is used in water systems, compressed air, and hydraulic or fuel pipelines.
View
Low Pressure Metric Male
To Press In Hose

Low Pressure Metric Male

0102b
The Low Pressure Metric Male Steel is a threaded fitting with a hose tail used in the fluid engineering industry. It is made of high-quality steel and comes in different sizes to fit specific projects. It is essential for the manufacture of fluid conveying pipes.
View
Low Pressure Spherical...
To Press In Hose

Low Pressure Spherical Terminal

0201
The Low Pressure Steel Spherical Terminal is a durable accessory used to connect components with piping in fluid systems. It is designed to work with low pressure and is ideal for applications that require moderate pressure. In addition, its spherical design allows for greater flexibility in the direction of the piping, making installation and maintenance...
View
Low Pressure Rubber Joint...
To Press In Hose

Low Pressure Rubber Joint Elbow

02053
The low-pressure rubber joint elbow is an accessory for changing the direction of fluid flow at a 90-degree angle in pipeline systems. It is made of corrosion-resistant brass with a rubber gasket and a technopolymer locking ring. It is used in low-pressure applications for water, air, and gas.
View
Male Terminal
To Press In Hose

Male Terminal

02051
The Steel Male Terminal is a sturdy component used in connecting pipes and hoses. Made of high-quality steel, its tapered shape fits perfectly onto the end of the hose or pipe and has an external threading that allows it to be fixed to other components of the system. Its design ensures a secure connection and prevents fluid leaks.
View
Low Pressure Smooth Spigot
To Press In Hose

Low Pressure Smooth Spigot

0107
The low-pressure smooth steel nipple is an accessory for connecting pipes or hoses. It is resistant and durable in industrial applications. It is used in the hydraulic industry and fluid conduction.
View
90º Bend Connection SAE Low...
To Press In Hose

90º Bend Connection SAE Low Pressure Rubber

0104b
The low-pressure rubber SAE 90º curved connection allows for changing the flow direction at a 90-degree angle in low-pressure piping systems. It is commonly used in low-pressure hydraulic systems, lubrication, and compressed air.
View

Customers who bought this product also bought:

Low Pressure Metric Nozzle
To Press In Hose

Low Pressure Metric Nozzle

0103b
A low-pressure metric steel nozzle allows the conveyance of liquids and fluids in pipelines. It is corrosion-resistant, has a conical shape, and is connected to the pipe by means of an aluminum bell, cap, or clamp. It is common in low-pressure hydraulic circuits.
View
Low Pressure Spherical...
To Press In Hose

Low Pressure Spherical Terminal

0101
The Low-Pressure Steel Spherical Terminal is a strong and spherical pipe accessory that allows for thermal expansion and contraction without excessive stress. Ideal for applications that require great flexibility and resistance to corrosion and abrasion.
View
90º Bend Connection SAE Low...
To Press In Hose

90º Bend Connection SAE Low Pressure Rubber

0104b
The low-pressure rubber SAE 90º curved connection allows for changing the flow direction at a 90-degree angle in low-pressure piping systems. It is commonly used in low-pressure hydraulic systems, lubrication, and compressed air.
View
FE Bell
To Press In Hose

FE Bell

0106
The Steel FE Bell allows the attachment of connection fittings to pipes.It is made of galvanized steel and is used for low pressure pipes. Easy installation and available in different sizes.It meets safety standards for efficiency.
View