Male Spigot Adapter John Guest

Push-fit technology. Quick disconnect without the need for tools. Easy to modify or expand a system. No corrosion. Reduced installation and maintenance times.

Material
Polipropileno
Color
NEGRO
Temperature
-20ºC / +70ºC (-4ºF / +158ºF)
Img Ref. Covasa
Ref. John Guest
Tubo
Rosca
Male Spigot Adapter
0578-11-15 PM051514E 15 1/2"
Male Spigot Adapter
0578-11-18 PM051814E 18 1/2"
Male Spigot Adapter
0578-11-28 PM052216E 22 3/4"
Male Spigot Adapter
057JG-06-01 PM050411E 4 1/8"
Male Spigot Adapter
057JG-06-02 PM050412E 4 1/4"
Male Spigot Adapter
057JG-06-03 PM050611E 6 1/8"
Male Spigot Adapter
057JG-06-04 PM050612E 6 1/4"
Male Spigot Adapter
057JG-06-05 PM050811E 8 1/8"
Male Spigot Adapter
057JG-06-06 PM050812E 8 1/4"
Male Spigot Adapter
057JG-06-07 PM050813E 8 3/8"
Male Spigot Adapter
057JG-06-08 PM051012E 10 1/4"
Male Spigot Adapter
057JG-06-09 PM051013E 10 3/8"
Male Spigot Adapter
057JG-06-10 PM051014E 10 1/2"
Male Spigot Adapter
057JG-06-11 PM051213E 12 3/8"
Male Spigot Adapter
057JG-06-12 PM051214E 12 1/2"
Total 0,0

Attachments

Make a connection

Cut the pipe.

DO NOT use a hacksaw.

Push in as far as it will go.

Pull to check security.

To disconnect

To disconnect, make sure the system is depressurized. Push the collar towards the fitting and remove the tube.

For 28MM

The 28mm fittings also have a collar with stainless steel teeth and an O-ring.

After inserting the tube, turn a screw cap approximately 1/4 turn. This locks the collar in place and reduces lateral and lateral movement of the tubing.

To disconnect, turn the screw cap 1/4 turn, push in the collar and remove the tube.

13 other products in the same category:

Customers who bought this product also bought: