Model 652 Lubricator

Model 652 Lubricator CEJN

Lubricators are necessary to extend service life, maintain peak performance, and reduce wear and tear on compressed air-powered tools and machines. The Model 652 for working pressures up to 10 bar (145 PSI) is one of our most popular lubricators.

Material
Aluminio, Policarbonato
Temperature
5°C — +50°C (41°F — +122°F)
Presión de Trabajo
10 bar (145 PSI)

You might also like

The Model 651 can supply the proper amount of oil for most pneumatic system applications, thanks to a lockable oil lever. Clear glass allows 360 degree visibility of oil flow. For optimal effect, CEJN recommends that you install lubricators close to the application. CEJN lubricators can be easily installed without tools.

Application: Virtually all industries, eg. and. Manufacturing, food, transformation, carpentry, paper mills, etc., relies on compressed air as an energy source. In a shared compressed air network, with numerous outlets and an extensive piping system, air preparation units are especially important.

Attachments

36 other products in the same category:

Regulator Bit 0-12 Bars
Filtering

Regulator Bit 0-12 Bars

METALWORK
05800-01
Pneumatics accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
20mc Filter Semi-Automatic...
Filtering

20mc Filter Semi-Automatic Purge

METALWORK
05801-02
Air treatment is made up of products designed to control aspects such as ventilation, air quality, temperature or humidity. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Regulator Model 652
Filtering

Regulator Model 652

CEJN
19503o
The job of a regulator is to regulate air pressure and keep it constant. This is especially important for certain pneumatic equipment. The CEJN Model 652 ensures minimal pressure differences between set point and operating pressure. It has a standard setting range of 0.5-10 bar to maintain the required pressure level.
View
Regulator Filter Bit 20mc...
Filtering

Regulator Filter Bit 20mc 0-12 Semiautomatic Purge

METALWORK
05800-03
Pneumatics accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
RMSA TMW Debugger
Filtering

RMSA TMW Debugger

METALWORK
05801-06
Pneumatics accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Regulator Filter 0-12 Bars...
Filtering

Regulator Filter 0-12 Bars 20mc Semiautomatic Purge

METALWORK
05801-03
Air treatment is made up of products designed to control aspects such as ventilation, air quality, temperature or humidity. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Regulator 0-12 Bars...
Filtering

Regulator 0-12 Bars Semiautomatic Purge

METALWORK
05801-01
Pneumatics accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Mini Model Regulator
Filtering

Mini Model Regulator

CEJN
19503m
A regulator is necessary to achieve controlled and consistent air pressure for certain pneumatic tools. With a standard setting range of 0.5-10 bar, the CEJN Model Mini maintains the required pressure level. It is characterized by having a locking device to avoid involuntary adjustments, a rolling diaphragm and a pressure gauge for pressure control.
View
Semiautomatic Filter...
Filtering

Semiautomatic Filter Regulator And Lubricator Group

METALWORK
05801-04
Air treatment is made up of products designed to control aspects such as ventilation, air quality, temperature or humidity. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
RMSA Metal Filter Cup
Filtering

RMSA Metal Filter Cup

METALWORK
9250
Pneumatic accessories are made up of a wide variety of components that complement or are part of other pneumatic elements.
View
Filter/Regulator Model 653
Filtering

Filter/Regulator Model 653

CEJN
19503c
The Model 653 combines a filter, regulator, and flat gauge for optimal performance. The filter will efficiently remove moisture or debris and the regulator provides consistent, controlled air pressure. Thanks to its compact design, it is perfect in applications where space is limited.
View
Filter Model 651
Filtering

Filter Model 651

CEJN
19503d
As air cools after a compression cycle, moisture builds up in the system, potentially causing pneumatic equipment to corrode or slow down, which could lead to downtime. To do this, we offer the Model 651 filter in our air handling units.
View
Knob Repair Set 0-12
Filtering

Knob Repair Set 0-12

METALWORK
92508
Pneumatic accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Regulator Model 653
Filtering

Regulator Model 653

CEJN
19503q
Regulators are required for certain pneumatic equipment that constantly require air pressure regulation. The CEJN Model 653 offers a standard adjustment range of 0.5-10 bar to maintain the required pressure level. Our range of regulators includes a rolling diaphragm to maximize life, a locking device to prevent inadvertent adjustments, and a pressure...
View
Replacement Filters
Filtering

Replacement Filters

CEJN
19503r
Save energy and efficiency with the new filters. The new filters give greater flow. Easy replacement of the filter units. Check the filters and change them before they lose efficiency and effectiveness. The clogged filter reduces the flow rate and does not remove the particles. Filter replacement is a simple, low-cost maintenance task that can maximize...
View
Filter/Regulator Model 652
Filtering

Filter/Regulator Model 652

CEJN
19503b
The Model 652 combines a filter, regulator, and flat gauge for optimal performance. The filter will efficiently remove moisture or debris and the regulator provides consistent, controlled air pressure. Thanks to its compact design, it is perfect for applications where space is limited.
View
Scal Line Final Purge...
Filtering

Scal Line Final Purge Accessory

METALWORK
45890
Pneumatic accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Bit Lubricator
Filtering

Bit Lubricator

METALWORK
05800-05
Air treatment is made up of products designed to control aspects such as ventilation, air quality, temperature or humidity. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Regulator Fixing Bracket
Filtering

Regulator Fixing Bracket

METALWORK
94007
Bracket for fixing the filtering group and pneumatic regulator of the syntesi series. Pneumatic accessories are made up of a wide variety of components that complement or are part of other pneumatic elements.
View
Regulator Model 651
Filtering

Regulator Model 651

CEJN
19503n
Los reguladores son necesarios para ciertos equipos neumáticos que requieren constantemente una regulación de la presión del aire. El Modelo 651 de CEJN ofrece un rango de ajuste estándar de 0.5-10 bar para mantener el nivel de presión requerido. 
View
Lubricator
Filtering

Lubricator

METALWORK
05801-05
Air treatment is made up of products designed to control aspects such as ventilation, air quality, temperature or humidity. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Filter Model 652
Filtering

Filter Model 652

CEJN
19503e
As air cools after a compression cycle, moisture builds up in the system, potentially causing pneumatic equipment to corrode or slow down, which could lead to downtime. To ensure a clean and dry system, we offer the CEJN Model 652 filter.
View
Model 160 Lubricator
Filtering

Model 160 Lubricator

CEJN
19503j
Lubrication adjusts precisely to variations or changes in air flow. They can fill up when under pressure. Easy adjustment. CEJN lubricators can be easily adjusted without the use of tools. They include a lockable oil adjustment knob and a clear indicator tube that allows oil flow to be seen in all directions. Models 112 and 160 can be filled when under...
View
Debugger Bit 0.01mc...
Filtering

Debugger Bit 0.01mc Semiautomatic Purge

METALWORK
05800-06
Pneumatics accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Model 651 Lubricator
Filtering

Model 651 Lubricator

CEJN
19503h
Lubricators are necessary to extend the life of tools and machines that run on compressed air. They help maintain peak performance and reduce wear and tear on equipment. The CEJN air handling system offers the Model 651 lubricator for working pressures up to 10 bar (145 PSI).
View
Knob Repair Set
Filtering

Knob Repair Set

METALWORK
94508
Pneumatic accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
1/2" Metal Lubricator Cup
Filtering

1/2" Metal Lubricator Cup

METALWORK
94512
Pneumatic accessories are made up of a wide variety of components that complement or are part of other pneumatic elements.
View
Filter Bit 20mc...
Filtering

Filter Bit 20mc Semi-Automatic Purge

METALWORK
05800-02
Pneumatics accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Filters Model 653
Filtering

Filters Model 653

CEJN
19503g
As air cools after a compression cycle, moisture builds up in the system, potentially causing pneumatic equipment to corrode or slow down, which could lead to downtime. To ensure a clean and dry system, we offer the CEJN Model 653 filter.
View
Filter Model 160
Filtering

Filter Model 160

CEJN
19503f
Excellent filtration of water and dirt. Quick filter element removal and replacement. Semi-automatic emptying as a standard feature. CEJN filters offer high flow capacity and withstand an inlet pressure of up to 17.5 bar (253.8 PSI).
View
Back Thread Gauge
Filtering

Back Thread Gauge

METALWORK
0586
Pneumatics accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View
Regulator Model 160
Filtering

Regulator Model 160

CEJN
19503p
High flow capacity. Precise regulation that does not require effort. Excellent hysteresis. CEJN regulators incorporate a locking device, a flexible rolling diaphragm, and a gauge. When space is limited, a mini version with threaded connections up to 1/8 inch can be used.
View
Filter/Regulator Model 651
Filtering

Filter/Regulator Model 651

CEJN
19503a
The Model 651 combines a filter, regulator, and flat gauge for optimal performance. The filter will efficiently remove moisture or debris and the regulator provides consistent, controlled air pressure. Thanks to its compact design, it is perfect in applications where space is limited.
View
Model 653 Lubricator
Filtering

Model 653 Lubricator

CEJN
19503k
Lubricators are necessary to extend service life, maintain peak performance, and reduce wear and tear on compressed air-powered tools and machines. The Model 653 for working pressures up to 10 bar (145 PSI) is one of our most popular lubricators.
View
Filter And Lubricator Group...
Filtering

Filter And Lubricator Group 20mc 0-12 Drain Bars

METALWORK
05800-04
Air treatment is made up of products designed to control aspects such as ventilation, air quality, temperature or humidity. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View