R7 Thermoplastic Tubing

R7 Thermoplastic Tubing TRANSFER-OIL

Construction and agricultural equipment -Agricultural brake systems - Forklift trucks - Articulated and telescopic booms - Aerial platforms - Scissor platforms - Cranes - General hydraulics - Industrial gases. Lighter, more flexible and more compact than traditional R1 hoses. Bonded construction. Abrasion resistant.

Standard
EN 855-R7, ISO 3949-R7, SAE 100 R7
Material
Elastómero de poliéster, Poliuretano
Refuerzo
2 Mallas Trenza Textil
Temperature
-40 ° C a +100 ° C (-40 ° F a +212 ° F): limitado a +70 ° C (+158 ° F) para fluidos a base de aire y agua

You might also like

Img Ref. Covasa
Transfer
Ø Interno
Ø Exterior
Presión de rotura
Radio de curvatura
Presión de trabajo
R7 Thermoplastic Tubing
10870-02 0660 3,5 mm
1/8" 		8,5 mm 920 bar
13300 psi 		25 mm 230 bar
3335 psi
R7 Thermoplastic Tubing
10870-03 0661 4,8 mm
3/16" 		10 mm 840 bar
12180 psi 		30 mm 210 bar
3045 psi
R7 Thermoplastic Tubing
10870-04 0662 6,4 mm
1/4 " 		11,8 mm 800 bar
11600 psi 		35 mm 200 bar
2900 psi
R7 Thermoplastic Tubing
10870-05 0663 8 mm
5/16" 		14,3 mm 760 bar
11020 psi 		45 mm 190 bar
2755 psi
R7 Thermoplastic Tubing
10870-06 0664 9,7 mm
3/8" 		16 mm 700 bar
10200 psi 		55 mm 175 bar
2550 psi
R7 Thermoplastic Tubing
10870-08 0665 13 mm
1/2" 		20,3 mm 560 bar
8120 psi 		75 mm 140 bar
2030 psi
Total 0,0

Medium pressure hose suitable for hydraulic applications with greater resistance to abrasion. For use with synthetic petroleum or water-based hydraulic fluids in hydraulic systems. Suitable for general fluid power transmissions such as agricultural earthmoving machinery and forklifts. Also suitable for many industrial gases (check compatibility). Approved by MSHA - Mine Safety and Health Administration - number IC-305.

Customers who bought this product also bought:

Wira Union
Wira

Wira Union

056W
Terminación instantánea de WIRA. La parte roscada se puede montar en racores de cono de 24 °. Instant WIRA termination. The threaded part can be mounted on 24 ° cone fittings.
View
STRAIGHT CONNECTOR
To Press In Hose

STRAIGHT CONNECTOR

02050
A straight low-pressure steel coupling connects two rubber tubes of equal diameter in a low-pressure line. It consists of two grooved spigots that ensure a tight connection. They are common in fuel, hydraulic and fluid transport applications, and in low-pressure liquid and gas transport systems. They withstand relatively low pressures and are suitable for...
View
Press Sleeve DN2
Hoses and Terminals

Press Sleeve DN2

0593-01
Pneumatics accessories are made up of a wide variety of components that complement or are part of other pneumatic elements. Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
View