TRANS-OXID Oxide Transformer PROWORK

Acid-based formulation that reacts on oxidized iron surfaces, transforming the oxide into a black layer.

Img	Ref. Covasa	Envase
	Q003-28	1 liter
Total 0,0

If the reaction has been carried out well, the surface will be blued black.
If the surface to be treated does not have rust, the reaction will be weaker, but just as effective. < / li>
The profitability of TRANS-OXID is high due to its covering power and performance in m2 (20 to 30 m2. per liter).
It can be used as a primer prior to the painting process .
Wait 24 hours before painting.

If you wish to obtain the technical data sheet and / or the product safety data sheet, you must request it. p >

Rusty and corroded surfaces.

Elimination of possible fats, oils and soot.
Removal of calamine flakes, peeling paint and non-adhered rust.
Apply TRANS-OXID with a stiff brush for good penetration.
The product can be applied even if the surface is wet.
If applied with a spray gun (air - less), or roller, it is important to apply 2 coats at intervals of 1/2 h.
Reaction time is 12 hours minimum.
We will remove the remains that have remained with water.
The product does not react on paint.
After painting, leave it unpainted, it means that it will oxidize again in 48 hours.

New surfaces.

Industrial Maintenance

PROWORK

Q003e

White, translucent, odor-free and stringy Vaseline grease. Lubrication of locks, hinges, blinds, battery terminals.

View