2TE Pipe
- Standard
- DIN 20021, EN 854 2TE
- Material
- Caucho sintético resistente al aceite
- Refuerzo
- 2 Mallas Trenza Textil
- Temperature
- de -40ºC a +100°C continuo +70°C para fluidos a base de agua
- Característica
- Resistencia a la abrasión
7 other products in the same category:
Hose manufactured on mandrel for the impulsion of hydrocarbons in general at 15 bar in transfers related to fuels with a maximum aromatic content of 40% and oleodynamic oil in return circuits.
Hose made on mandrel with corrugated surface for the impulsion and suction of hydrocarbons in general in transfers related to fuels with a maximum aromatic content of 40% or oleodynamic oil in return circuits.
With Unilock fittings, do not use for brake plants with compressed air or in circuits under strong pressure impulses.
Specialuy designed for oil, gas-oil and petroleum suctions and return lines.
Customers who bought this product also bought:
Since July 1, 2013, all I.T.V. began to carry out new diagnostic tests to check the vehicle's brake pressure, according to the entry into force, on January 1, 2012, of the European Directive 2010/48, which establishes that all vehicles dedicated to the transport, whether of goods or people, whose Maximum Authorized Mass (MMA) is greater than 1 ton will...
Double series full clamp. It is made of polypropylene and the metal parts are in carbon steel St37-2. Available in sizes for rigid tube with nominal diameters from 6 mm to 42 mm, (from group 1 to 5).
Pneumatic valves are mechanical air regulation and control devices. Among its main functions are to start, stop or regulate the passage of gases.
Pneumatics is the technology that uses compressed air to operate different mechanisms. In the industrial sector it is used in multiple processes and applications.
High Pressure Hydraulic System - Installation constraints